Search in Category
ISO Roundline
Search term required.
Filter Your Search





Categories
ISO Roundline
Air Components - Pneumatics/Pneumatic Actuators/Piston Rod/ISO/ISO Roundline
Viewing Page 1 of 33
(385 results)
Festo ISO 6432 Cylinder
Item #:
DSNU-25-50-PPV-A
Festo ISO Round Cylinder, Pneumatic cushioning adjustable at both ends, Magnet: Yes, Piston Diameter: 25 mm, Piston Rod Thread: M10x1.25, Stroke: 50 mm
Manufacturer: Festo
Supplier Part #: 19246
Festo ISO 6432 Cylinder
Item #:
DSNU-25-160-PPV-A
Standard to ISO 6432; Dbl-Acting, 25 mm Bore, 160 mm Stroke; 12 mm Ø Rod w/M10x1.25 Male Thread; G1/8 Pneumatic Connection Ports; Adj. Cushioning Both Ends; Prox Switch Ready
Manufacturer: Festo
Supplier Part #: 19250
Festo Round Cylinder
Item #:
DSNU-32-160-PPV-A
Dbl-Acting, 32 mm Bore, 160 mm Stroke; 12 mm Ø Rod w/M10 x 1.25 Male Thread, G1/8 Pneumatic Connection Ports; Adjustable Cushions Both Ends; Prox Switch Ready
Manufacturer: Festo
Supplier Part #: 196026
Festo Standard cyl. DSNU-16-80-PPS-A
Item #:
DSNU-16-80-PPS-A
Festo ISO Round Cylinder, Self-adjusting pneumatic end-position cushioning, Magnet: Yes, Piston Diameter: 16 mm, Piston Rod Thread: M6, Stroke: 80 mm
Manufacturer: Festo
Supplier Part #: 559266
Festo Standard Round Cylinder
Item #:
DSNU-25-250-PPV-A
Festo ISO Round Cylinder, Pneumatic cushioning adjustable at both ends, Magnet: Yes, Piston Diameter: 25 mm, Piston Rod Thread: M10x1.25, Stroke: 250 mm
Manufacturer: Festo
Supplier Part #: 19252
Festo ISO 6432 Cylinder
Item #:
DSNU-32-250-P-A
Festo ISO Round Cylinder, Flexible cushioning rings/plates at both ends, Magnet: Yes, Piston Diameter: 32 mm, Piston Rod Thread: M10x1.25, Stroke: 250 mm
Manufacturer: Festo
Supplier Part #: 195988
Festo Standard cyl. DSNU-8-100-P-A
Item #:
DSNU-8-100-P-A
Festo ISO Round Cylinder, Flexible cushioning rings/plates at both ends, Magnet: Yes, Piston Diameter: 8 mm, Piston Rod Thread: M4, Stroke: 100 mm
Manufacturer: Festo
Supplier Part #: 19182
Festo ISO 6432 Cylinder
Item #:
DSNU-25-50-P-A
Dbl-Acting, 25 mm Bore, 50 mm Stroke; 12 mm Ø Rod w/M10x1.25 Male Thread; G1/8 Pneumatic Connection Ports; Cushioning Rings/Pads Both Ends; Prox Switch Ready
Manufacturer: Festo
Supplier Part #: 19221
Festo ISO 6432 Cylinder
Item #:
DSNU-10-10-P-A
Festo ISO Round Cylinder, Flexible cushioning rings/plates at both ends, Magnet: Yes, Piston Diameter: 10 mm, Piston Rod Thread: M4, Stroke: 10 mm
Manufacturer: Festo
Supplier Part #: 19183
Festo ISO 6432 Cylinder
Item #:
DSNU-25-80-PPV-A
Festo ISO Round Cylinder, Pneumatic cushioning adjustable at both ends, Magnet: Yes, Piston Diameter: 25 mm, Piston Rod Thread: M10x1.25, Stroke: 80 mm
Manufacturer: Festo
Supplier Part #: 19247
Festo Standard Cylinder
Item #:
DSNU-16-80-PPV-A
Festo ISO Round Cylinder, Pneumatic cushioning adjustable at both ends, Magnet: Yes, Piston Diameter: 16 mm, Piston Rod Thread: M6, Stroke: 80 mm
Manufacturer: Festo
Supplier Part #: 19231
Festo ISO 6432 Cylinder
Item #:
DSNU-25-20-PPV-A
Pneumatic cushioning adjustable at both ends, Magnet: Yes, Piston Diameter: 25 mm, Piston Rod Thread: M10x1.25, Stroke: 20 mm
Manufacturer: Festo
Supplier Part #: 1908314
